header_blackwaterfishing
Home Freshwater Saltwater Tech Tips Apparel Pro Staff Testimonials News Media Photos Dealers Blog Store Contact Us
main_header_blackwater_fishing
Introduction
Video Tutorials
Served Connection Guide
Hollow Braid Splice
Worm Knot Connection
Uni to Uni Connection
Albright Connection
Uni to Improved Clinch
Flourocarbon to Hollow Braid
Hollow Braid End Loop 		Uni to Uni Connection
Uni to Uni Knot Advantages and Applications
Used to tie braided line to fluorocarbon of larger diameter.
Uni to Uni Knot Connection Guide
Step 1
Uni to Uni Knot - Step 1

Uni to Uni Knot - Step 1
 Start by making a 6 turn uni knot with the fluorocarbon heading away from the tag end of the braid.

Make a loop with the fluorocarbon next to the braid with the tag end heading away from the tag end of the braid (leave about a foot long tag end of fluorocarbon).
Step 2
Uni to Uni Knot - Step 2
 Pass the tag end of the fluorocarbon through the loop 6 times. Make sure that the fluorocarbon wraps both around itself and the braid on every wrap.
Step 3
Uni to Uni Knot - Step 3 Cinch down the fluorocarbon uni knot by pulling on both the tag end and main line of the fluorocarbon.
Step 4
Uni to Uni Knot - Step 4 Now perform the same action but with the braided line in the opposite direction. Once again leave about a foot long tag end, but pass the braid through the loop 11 times.
Step 5
Uni to Uni Knot - Step 5

Cinch down the braided uni knot by pulling on the tag end and main line of the braid.

Finally pull on the main line of both the braid and the fluorocarbon to snug both uni knots together.
  Back to Top

 
© 2011 Blackwater International, Inc.
19500 Rancho Way Unit #105, Rancho Dominguez, CA 90220
P: 310-798-3474 | Fax: 310-798-5463